4:1 IPR Reciprocating Orthodontic Contra Angle

  • 4:1 IPR Reciprocating Orthodontic Contra Angle Manufacturers, 4:1 IPR Reciprocating Orthodontic Contra Angle Factory, Supply 4:1 IPR Reciprocating Orthodontic Contra Angle
  • 4:1 IPR Reciprocating Orthodontic Contra Angle Manufacturers, 4:1 IPR Reciprocating Orthodontic Contra Angle Factory, Supply 4:1 IPR Reciprocating Orthodontic Contra Angle
  • 4:1 IPR Reciprocating Orthodontic Contra Angle Manufacturers, 4:1 IPR Reciprocating Orthodontic Contra Angle Factory, Supply 4:1 IPR Reciprocating Orthodontic Contra Angle
  • 4:1 IPR Reciprocating Orthodontic Contra Angle Manufacturers, 4:1 IPR Reciprocating Orthodontic Contra Angle Factory, Supply 4:1 IPR Reciprocating Orthodontic Contra Angle
  • video
4:1 IPR Reciprocating Orthodontic Contra Angle
  • TEALTH
  • CHINA
  • 3-5 DAYS
  • 10000 PCS

Features:
90μm-use as a saw for opening contacts
60μm-for reduction
40μm-for contouring
25μm-for finishing
15μm-for per polishing

Product name: Tealth® 4:1 IPR interproximal low speed contra angle:

Order code: IPR-02C


Parameters:

fits E type handpieces

1.4mm stroke

Autoclavable

Optimal torque

4:1 gear ratio

Reduction speed


IPR Contra angle

4:1 IPR prophy contra angle

Metal Strips:

Double size strips, with holes.

A dental abrasive particles coated strip, is used to modify the surface of the tooth or restoration.

Safe and comfortable treatment.


Features:

07 micron--serrated saw (for choice)

15 micron-for pre polishing

25 micron-for finishing

40 micron-for contouring

60 micron-for reducting

90 micron-for opening contacts

Reciprocating Stripping IPR KIT Handpiece

Tealth® Metal interproximal strips IPR set maintenance:

1.Please notice that check product appearance if it is obviously deformative or attached foreign matters.

2.It must be kept in high temperature autoclavable sterilizer with 15 mins , and then dried for 30 mins. 

3.put the stripper in correct way with contra angle /manual grip . 

4.the stripper will be placed on the interproximal teeth lightly stroke to cut and grind

5. in operation , if the stripper was broken or dropped at ground, should replace a new one  in time . 

6.After operation , the stripper should be cleaned up completely and put in dry conditions. 



Parts Factory
Parts Factory
Assembling Lines
Assembling Lines
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right