External Spray 2 Holes Mini Air Motor

  • External Spray 2 Holes Mini Air Motor Manufacturers, External Spray 2 Holes Mini Air Motor Factory, Supply External Spray 2 Holes Mini Air Motor
  • External Spray 2 Holes Mini Air Motor Manufacturers, External Spray 2 Holes Mini Air Motor Factory, Supply External Spray 2 Holes Mini Air Motor
  • External Spray 2 Holes Mini Air Motor Manufacturers, External Spray 2 Holes Mini Air Motor Factory, Supply External Spray 2 Holes Mini Air Motor
  • video
External Spray 2 Holes Mini Air Motor
  • TEALTH
  • CHINA
  • 3-5 DAYS
  • 10000 PCS

Order code: BEN-08C
Parameters:
Fit with E type mini air motor, 2 holes connector
Rotation speed :14000-20000RPM
Conform to ISO 13485 standard

Product name: Tealth external irrigation air motor 4 holes

Order Code: BEN-08C

Water spray: External irrigation

Connector: ISO strandard 2 holes, E-type 


Descriptions

E-type Low-speed 1:1, with external cooling system

Air pressure

245~392kPa (2.5-4.0 kgf/cm²)

Atomized water pressure

200 kPa

Atomized air pressure

200 kPa

Rotation Speed

16 000~20 000r/min

Chuck type

Push button/ Latch type

Bur applicable

Φ2.334~2.350 mm

Noise

≤70dB

mini motor

dental handpiece

low speed handpiece



mini motor


[Handpiece inserting & removal]

Inserting

Insert the E-type handpiece onto the motor and turning all the way until it click to stop.

Removal

Grip both handpiece and motor respectively, pulling and separating.


dental handpiece


[Forward/Reverse Rotation]

1) Forward Rotation: Turn the FWD/REV change ring to“F”.

2) Reverse Rotation: Turn the FWD/REV change ring to “R”.

3) When the FWD/REV change ring is positioned in the middle of “F” and “R”, the drive air is interrupted and the motor does not rotate.

4) When FEW/REV change ring is positioned in F or R, the rotation speed is maximum.

 low speed handpiece


[Maintenance & Care]

After each treatment, sterilizing handpiece in autoclave according to the following steps:

1. Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.

2. Lubricate handpiece.

3. Package into autoclaving pouch.

4. Autoclave the handpiece for 12 min at 135℃.

5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components

6. Do not use an ultrasonic cleaner to clean the dental handpiece.

7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.



CE Certification-Tealth Medical
CE Certification-Tealth Medical
ISO 13485:2016 Management System--Tealth Medical
ISO 13485:2016 Management System--Tealth Medical
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right