External Spray Key Type Low Speed Dental Contra Angle
- TEALTH
- CHINA
- 3-5 DAYS
- 10000 PCS
Order code: CEN-22C
Features:
push button , easily take it out , No fly out.
Diameter meter is φ2.35mm
External water spray system.
smooth outlooking , conform to ergonomic design.
Product name: Tealth 1:1 external irrigation latch type contra angle
Order Code: CEN-22C
Gear ratio: 1:1
Chuck type: latch type
Water spray: External irrigation
Connector: ISO strandard E-type air motor
Descriptions | E-type Low-speed 1:1, with external cooling system |
Air pressure | 245～392kPa (2.5-4.0 kgf/cm²） |
Atomized water pressure | 200 kPa |
Atomized air pressure | 200 kPa |
Rotation Speed | 16 000～20 000r/min |
Chuck type | Push button/ Latch type |
Bur applicable | Φ2.334～2.350 mm |
Noise | ≤70dB |
[Handpiece inserting & removal]
Inserting
Insert the E-type handpiece onto the motor and turning all the way until it click to stop.
Removal
Grip both handpiece and motor respectively, pulling and separating.
[Bur inserting& removal]
a)Connecting the bur: Swing the latch, put the bur inside the head and make sure the notch of the bur match with corresponding part of the spindle. Then, swing the latch to the original position.
b)Disconnecting the bur: Swing the latch to unlock the bur, and then take out the bur.
[Maintenance & Care]
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1. Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.
2. Lubricate handpiece.
3. Package into autoclaving pouch.
4. Autoclave the handpiece for 12 min at 135℃.
5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components
6. Do not use an ultrasonic cleaner to clean the dental handpiece.
7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.
