Internal Spray 2 Holes Air Motor dental handpiece
- TEALTH
- CHINA
- 3-5 DAYS
- 10000 PCS
Order code: BIN-01C
Parameter:
Air/ water tube , internal water system
Match up E type motor , 2 hole conneciton
Rotation speed :14000-20000RPM
Conform to ISO 13485 standard
Product name: Tealth internal irrigation air motor 2 holes
Order Code: BIN-01C
Water spray: Internal irrigation
Connector: ISO strandard 2 holes, E-type
Separated air tube & water pipe, perfect cooling system.
Descriptions | E-type Low-speed 1: 1, internal cooling system |
Specifications | 1020-M4/1020-B2 |
Air pressure | 392kPa |
Atomized water pressure | 200 kPa |
Atomized air pressure | 200 kPa |
Chuck type | Push button/Manual Operation |
Bur applicable | Φ2.334～2.350 mm |
Noise | ≤70dB |
[Handpiece inserting & removal]
Inserting
Insert the E-type handpiece onto the motor and turning all the way until it click to stop.
Removal
Grip both handpiece and motor respectively, pulling and separating.
[Forward/Reverse Rotation]
1) Forward Rotation: Turn the FWD/REV change ring to“F”.
2) Reverse Rotation: Turn the FWD/REV change ring to “R”.
3) When the FWD/REV change ring is positioned in the middle of “F” and “R”, the drive air is interrupted and the motor does not rotate.
4) When FEW/REV change ring is positioned in F or R, the rotation speed is maximum.
[Maintenance & Care]
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1. Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.
2. Lubricate handpiece.
3. Package into autoclaving pouch.
4. Autoclave the handpiece for 12 min at 135℃.
5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components
6. Do not use an ultrasonic cleaner to clean the dental handpiece.
7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.
