External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece

  • External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Manufacturers, External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Factory, Supply External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece
  • External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Manufacturers, External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Factory, Supply External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece
  • External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Manufacturers, External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Factory, Supply External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece
  • External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Manufacturers, External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Factory, Supply External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece
  • External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Manufacturers, External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece Factory, Supply External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece
  • video
External irrigation Key Type 2.35mm Low Speed Contra Angle Handpiece
  • TEALTH
  • CHINA
  • 3-5 DAYS
  • 10000 PCS

Order code: CEN-21C
Features:
latch type , easily take it out , No fly out.
Diameter meter is φ2.35mm
External water spray system.
Stripe outlooking , conform to ergonomic design.

Product name: Tealth 1:1 external irrigation latch type contra angle

Order Code: CEN-21C

Water spray: External irrigation

Chuck type: latch type

Gear Ratio: 1:1

Bur size: 2.35mm

Connector: ISO strandard E-type air motor


Descriptions

E-type Low-speed 1:1, with external cooling system

Air pressure

245392kPa (2.5-4.0 kgf/cm²

Atomized water pressure

200 kPa

Atomized air pressure

200 kPa

Rotation Speed

16 00020 000r/min

Chuck type

Latch type

Bur applicable

Φ2.3342.350 mm

Noise

70dB

latch type contra angle

1:1 contra angle



low speed handpiece


[Handpiece inserting & removal]

Inserting

Insert the E-type handpiece onto the motor and turning all the way until it click to stop.

Removal

Grip both handpiece and motor respectively, pulling and separating.


latch type contra angle


[Forward/Reverse Rotation]

1) Forward Rotation: Turn the FWD/REV change ring to“F”.

2) Reverse Rotation: Turn the FWD/REV change ring to “R”.

3) When the FWD/REV change ring is positioned in the middle of “F” and “R”, the drive air is interrupted and the motor does not rotate.

4) When FEW/REV change ring is positioned in F or R, the rotation speed is maximum.

 1:1 contra angle


[Maintenance & Care]

After each treatment, sterilizing handpiece in autoclave according to the following steps:

1. Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.

2. Lubricate handpiece.

3. Package into autoclaving pouch.

4. Autoclave the handpiece for 12 min at 135℃.

5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components

6. Do not use an ultrasonic cleaner to clean the dental handpiece.

7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.



Parts Factory
Parts Factory
Assembling Lines
Assembling Lines
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right