20:1 LED Implant Dental Handpiece
- TEALTH®
- China
- Within 3 working days
- 10,000Pcs/Year
Order code: R20L-01C
20:1 LED implant conrta angle dental handpiece
Description:
LED 20:1 implant handpiece, generator inside, self-illuminted
Button type chuck.
Internal and external irrigation system.
Provides sufficient force at low speed.
Max torque 70Ncm
Ergonomic comfort grip.
Reasonable price and excellent performance.
Compatible with all e-type motors(NSK, Aseptico,W&H,Nouvag Acteon,KAVO).
One Year warranty.
Tealth® 20:1 LED implant conrta angle 70N.cm dental handpiece:
1.Use in dental implant
2.Generator inside, self-illumined
3.Max torque 70N.cm
4.Unfading and Non-slipping
5.Fit for ISO standard E-type motor, NSK®,W&H®,Kavo® implant motors...
Tealth® 20:1 LED implant conrta angle 70N.cm dental handpiece parameters:
LED Generator inside, self-illuminated
Gear ratio: 20:1 reduction
Rotation speed:5-2,000r/min
Push button chuck type
Bur applicable:Φ2.35mm
Max torque: 70N.cm
Noise:≤70dB
Tealth® LED 20:1 implant contra angle maintenance:
1. Cleaning
Remove bur from handpiece after using and brush. soak the head into clean water and operate for 15 seconds. Then autoclave handpiece.
If the handpiece is the type of head can remove one, please take off the head and wash it and the body with clean water.
2. lubricating
Lubricate oil with E type oil nipple insert the handpiece and spray 2 or 3 seconds.
If handpiece head dirty enough, please remove the back cap with spanner and spray oil inside.
Please lubricate handpiece per 30 minutes while working continuous.
3. Sterilization
It shall be sterilized before handpiece is used at the first time: Autoclave the handpiece for 12 min. at 135℃
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1）Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2）Lubricate handpiece.
3）Place into autoclaving pouch and mark.
4）Autoclave the handpiece for 12 min. at 135℃.
