LED High & Low Speed Dental Handpiece Set
Brand: TEALTH®
Product origin: China
Delivery time: Within 3 working days
Supply capacity: 10,000Pcs/Year
Order code: T-11
LED high & low speed dental handpieces kit including: led low speed handpiece 1 kit, led high speed handpiece 2pcs.
LED contra angle, self-illuminated, E-generator, bright light.
LED high speed handpiece, ceramic bearings, with perfect cooling
Internal irrigation, separated air tube & water pipe
Product name: Tealth® LED High & Low speed dental handpiece kit
The kit is including:
LED high speed turbine handpiece: 2pcs
LED internal irrigation low speed: 1 set
(LED contra angle x1pc / LED straight head x1pc / Internal irrigation air motor x1pc)
Order code: T-11
Tealth® T-11 LED turbine & Low speed dental handpiece parameters:
LED low speed handpiece kit:
Water spray: internal irrigation
LED Self-illuminated, Micro generator inside.
Air pressure:245-392kPa
Atomized water pressure:200kPa
Atomized air pressure:200kPa
Rotation Speed:14,000-20,000r/min
Push button chuck
Bur applicable:Φ2.35mm , Φ1.60mm
Noise :≤70dB
LED high speed handpiece:
LED Generator inside, self-illuminated
Atomized water pressure:200kPa
Atomized air pressure:200kPa
Rotation speed: 320,000-400,000r/min
Noise: ≤70dB
Bur applicable: φ1.59mm-1.60mm
Chuck type: Push button
Tealth® T-11 LED turbine & Low speed dental handpiece advantage：
1.Built-in E-generator,no need light source from motor, self-luminous when rotation, provide bright light source.
2.LED Light is changeable, easy for operation and long time service life.
3.Can be used in common with kavo/M&K/BEING ....
4.Changeable head design,rich the handpiece function:Polishing/Fine/Orthodontics
5.Lower maintenance cost,if the handpiece dameged, just need to buy a new head and replace it,and keep old handpiece body, no need to buy a new one.
6.Air tube & water pipe are separated design，provide perfect cooling
Tealth® T-11 LED turbine & Low speed dental handpiece maintenance:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135℃
