Brand: TEALTH
Product origin: CHINA
Delivery time: 3-5 DAYS
Supply capacity: 10000 PCS
Order code: CEN-02C
push button , easily take it out , No fly out.
Diameter meter is φ2.35mm
External water spray system.
Stripe outlooking , conform to ergonomic design.
Product name: Tealth 1:1 external irrigation 2.35mm CA push button contra angle
Order Code: CEN-02C
Gear ratio: 1:1
Chuck type: push button
Water spray: External irrigation
Connector: ISO strandard E-type air motor
Descriptions | E-type Low-speed 1:1, with external cooling system |
Air pressure | 245~392kPa (2.5-4.0 kgf/cm²) |
Atomized water pressure | 200 kPa |
Atomized air pressure | 200 kPa |
Rotation Speed | 16 000~20 000r/min |
Chuck type | Push button/ Latch type |
Bur applicable | Φ2.334~2.350 mm |
Noise | ≤70dB |
[Handpiece inserting & removal]
Inserting
Insert the E-type handpiece onto the motor and turning all the way until it click to stop.
Removal
Grip both handpiece and motor respectively, pulling and separating.
[Irrigation]
When water is needed, please connect the plastic tube with the water outlet of air motor, and connect the other end of the plastic tube with the irrigation tip. As the plastic tube is little bit long, please cut the tube according your situation.
[Maintenance & Care]
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1. Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.
2. Lubricate handpiece.
3. Package into autoclaving pouch.
4. Autoclave the handpiece for 12 min at 135℃.
5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components
6. Do not use an ultrasonic cleaner to clean the dental handpiece.
7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.